Mobotix S14 Especificaciones descargar pdf (Pagina 18)

www.mobotix.com

S14

Mounting On A Door

A sensor module on a door should always be ﬁtted with SlopeMount. Thanks to the

15° lens angle, less important areas such as ceiling or sky are reduced and the areas

in front of the door are captured with improved image clarify.

Wall Installation

Installing an S14D sensor module on a wall, for example, on basic partition walls or

fake walls with cavities behind the wall cover (minimum thickness of 15mm), is just as

easy as an installation on a ceiling. Drill a hole, insert the sensor module, ﬁx from

behind with a locknut and connect to the camera housing. Depending on the installation

height and the required camera focus, the camera can be installed with or without the

SlopeMount with 15° tilt, which is available as an accessory.

Typically the sensor modules are mounted high enough (from 2.5 m) to protect them

against direct access. Since the image quality and detail decrease with distance of an

object from the camera focus (center of image), it is recommended to install the camera

so that the focus is on the center of the event in the room, using the SlopeMount, a

15° inclined wall mounting.

SlopeMount 15°

mounting aid

(Accessories)

Installation Examples

Camera focus (best image quality)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Sin comentarios

Mobotix S14 Especificaciones Pagina 18