Mobotix CamIO Manual de usuario

MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected] • 9.11.2007Current PDF File:www.mobotix.com > Support >

1.2 The MOBOTIX CamIO and MOBOTIX Cameras1.2.1 Functional Overview of the CamIO Models© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.

1.2.2 Connection Cables between CamIO and MOBOTIX CamerasTwo cables are required to connect the MOBOTIX camera to the CamIO:• Ethernet cable: Establis

1.3 Important Notes1.3.1 Safety Regulations1.3.2 Cables for the MOBOTIX CamIOOnly use cables, which have been approved for the pertinent type of insta

1.3.3 Minimum Load at the Signal OutputsIn order to avoid oxidation of the relay points, you should use minimum loads of5V=/100mA.1.3.4 Safety Notes

Fire PreventionWhen installing the power lines to the camera, make sure you always adhere tothe relevant regulations on wiring and fire prevention at

© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected]/56MOBOTIX CamIO User ManualNotes

2 MOUNTING2.1 Delivered Parts, Components, Dimensions and Connectors2.1.1 Delivered Parts and Components© MOBOTIX AG • Security-Vision-Systems • M

2.1.2 Wall Mount Foot and HousingThe MOBOTIX CamIO housing (item1) and the housing of the CamIO itself (item2)are made of white, fiber-reinforced pl

2.1.3 Dimensions and Drilling TemplateDimensions of the MOBOTIX CamIO Housing© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.c

Dimensions of the MOBOTIX CamIO Housing with Wall Mount Foot© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • sales@mobo

© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected] CamIO User ManualNote: MOBOTIX offers inexpe

© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected]/56MOBOTIX CamIO User Manual

© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected]/56MOBOTIX CamIO User Manual

2.1.4 Connectors and WiringTerminal Connector for Power Supply, External Devices, Sensors and Audio De-vicesMake sure that you are adhering to the app

Terminal Connector and Wiring of the Ethernet ConnectorMake sure that you are using a standardCAT5 Ethernet cable for connecting the Ether-net cable t

2.2 Information on Connecting the MOBOTIX CamIOThe CamIO can be used with a MOBOTIX M12 or an M22. Simply replace the origi-nal foot of the correspond

Mounting the CamIO in four stepsMounting the CamIO is done in four steps (or three, if no external devices are con-nected; skip step3 in this case):1

2.3 Mounting the CamIO Wall Mount and the Control Cable2.3.1 Mounting with an M12 Camera• Unscrew the upper Allen screw in the originalfoot of the mou

• Insert the M12 control cable for the CamIOfrom below into the turn/tilt unit of the cam-era. Remove the blue plug labeled RS-232from the insect prot

2.3.2 Mounting with an M22 Camera• Unscrew the upper Allen screw in the originalfoot of the mount, which holds the turn/tilt unitin place (5mm Allen

• Insert the Ethernet cable and the M22 controlcable from below into the turn/tilt unit of theCamIO wall mount foot.• Insert the supplied cover into t

CamIO User Manual1 INTRODUCTION 41.1 MOBOTIX CamIO Concept 61.2 The MOBOTIX CamIO and MOBOTIX Cameras 81.2.1 Functional Overview of the CamIO Models 8

2.4 Mounting the CamIO Housing and Installing the Cables2.4.1 Mounting the CamIO Housing on the WallThe appendix of this manual contains a 1:1 drillin

2.4.2 Power Supply of the CamIOYou can supply power to the MOBOTIX CamIO using one of these two methods:• Direct power supply: Mains power (230V~/115

Installing the power supply:Use a two-wire cable (or any other suitable cable) to provide the power supply.Make sure that you are respecting the minim

Connect the power supply to the CamIO:• Puncture the blue seal with the end of theblack/brown wire (phase conductor L) andguide it into terminal1. Ti

2.4.3 Ethernet Connection of the CamIO• Remove the outer insulation (sheath) of theEthernet cable and guide it through the properopening at the bottom

2.5 Connecting External Components to the CamIO2.5.1 Connecting External Devices, Sensors and Audio DevicesThe MOBOTIX CamIO supplies connectors for t

Make sure that you follow the terminal assign-ment of the CamIO's bottom terminal connector.Connecting and sealing the cables follows thesame ins

MOBOTIX CamIO Connection Example© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected]/56MOBOTIX CamIO Us

2.6 Mounting the Camera on the CamIOOnce the camera has been mounted to the foot of the CamIO wall mount, the Eth-ernet and control cables have been c

2.6.2 Connecting the Ethernet and the CamIO Control CablesIn order to connect the camera to the CamIO, you need to attach the Ethernet andcontrol cabl

3 OPERATION OF THE CAMIO 423.1 Activating the CamIO 423.2 Configuration Sample 433.2.1 Functional Overview 433.2.2 Terminal Connections of the CamIO 4

2.7 Wiring, Fire Prevention, Lightning and Surge ProtectionWhen installing the wiring inside or outside of buildings, make sure you always ad-here to

• Surge protection: Make sure you have installed proper protection againstelectrical surges in order to prevent damage to the camera, the building and

2.8 Accessories, Replacement PartsCamIO Wall Mount FootThe wall mount foot is used for mounting the cam-era to the MOBOTIX CamIO.CamIO HousingReplacem

Cable SealsThe seals will protect the cables against water thatcould be entering along the wires.M22 NET PlugPlug for sealing off the Ethernet cable o

3 OPERATION OF THE CamIO3.1 Activating the CamIOOnce the CamIO and the MOBOTIX camera have been properly installed (seechapter2), you can set up the

3.2 Configuration SampleThe following example of a door intercom system demonstrates one possible ap-plication and shows the steps for properly config

ter the building. If required, the receptionist can manually switch the additionallighting using the softphone keys: key 3 to switch the lights on and

3.2.4 Configuring the MOBOTIX Camera1) Activate arming of the camera• Activate arming (Setup Menu> General Event Settings).2) Configure recording•

• Activate recording for VM event (Setup Menu> Recording).• Activate VM event and set up video motion window (Setup Menu> EventSettings).© MOB

3) Configure SI event and switching of additional lighting (SO action)• Configure SO action and activate action profile (Setup Menu> Actions).4) C

© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected]/56MOBOTIX CamIO User ManualNotes

• Set Audio Input to Line In (Admin Menu> Loudspeaker and Microphone;audio comes from the door intercom system's microphone).• Set up and act

5) Configure SI event and VoIP phone call (CL message)For more information on setting up the SIP telephony features of MOBOTIX cam-eras, read chapter

• Add CL message to messaging profile and select phone profile (SetupMenu> Messaging2; SD message has already been configured).3.2.5 Configuring

© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected]/56MOBOTIX CamIO User ManualNotes

4 TECHNICAL SPECIFICATIONS© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected]/56MOBOTIX CamIO User Man

Allowed Cable Diameters and Cable Lengths© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected]/56MOBOTIX

Terminal Connector for Power Supply, External Devices, Sensors and Audio De-vices© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobot

Terminal Connector and Wiring of the Ethernet ConnectorEthernet cabling today commonly follows theT568B standard; older Ethernet cabling mayhave been

Declaration of Conformity© MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected]/56MOBOTIX CamIO User Manu

ManufacturerMOBOTIX AGKaiserstrasseD-67722 LangmeilGermanyTel : +49 6302 9816-103Fax: +49 6302 9816-190http://[email protected]

1 INTRODUCTIONThe MOBOTIX CamIO is the expansion box for connecting the MOBOTIX camerasM12 and M22M (IT and Secure models). In the security and home a

MOBOTIX AG • Security-Vision-Systems • Made in Germanywww.mobotix.com • [email protected] • 9.11.2007Current PDF File:www.mobotix.com > Support >

When mounting the MOBOTIX CamIO, the foot of the CamIO wall mount replacesthe original foot of an M12 or M22 camera mount. The foot of the CamIO wallm

1.1 MOBOTIX CamIO ConceptSimple InstallationWhen designing the MOBOTIX CamIO, special focus was placed on easy installa-tion of the expansion box. The

Backup power using the CamIO-ACplusThe integrated rechargeable battery of the CamIO-ACplus model can bridgesmaller power failures and thus protects th