Mobotix D24M Manual de usuario descargar pdf (Pagina 83)







www.mobotix.com • [email protected]



   

: Stick the

black wall sealing to the back of the Wall Mount (remove

the adhesive foil ﬁrst, the surface must be clean and

free of grease). Pass the network cable through the

large square opening and into the Wall Mount. Use

the included screws to install the Wall Mount (without

the camera) at the intended position. Pass the network

cable through the large square opening on back side

of the Wall Mount.





: Prepare the on-site network cable

for connection with the camera patch cable using a

standard connector. Excess cable can be stored easily

within the Wall Mount.





Mount

: Connect the camera patch cable to the network

cable. Then mount the bottom plate with the camera

in the slots from below and ﬁx it in place on the Wall

Mount using the 4 Allen screws (Allen wrench included).

Proceed

to Section 2.11, Aiming And Adjusting The Lens.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 147 148

Sin comentarios

Mobotix D24M Manual de usuario Pagina 83