Mobotix T24S Información técnica descargar pdf (Pagina 64)

64/98

T24 System Manual Part2: Access Conﬁguration On The Keypad

www.mobotix.com • [email protected]

3.3.4 Add Further Admin Cards

As part of the initial system startup, you have already set up a red

admin card via the keypad (see 2.2.2). If needed, you can also set up

additional admin cards via the keypad (e.g., as backup cards or for

other users wanting to manage the system). Contact your MOBOTIX

dealer to purchase red admin cards.

To set up an additional red admin card, you need a previously set-up admin card or the

Super PIN. Proceed as follows:

Proceed As Follows:

1. Enter Conﬁguration Mode: Press the OK/MENU button until you hear the second

beep (button ﬂashes blue).

2. Hold your previously set-up admin card up to the keypad’s buttons (or enter the

Super PIN and then press the OK/MENU button) until you hear a beep and the

OK/MENU button continuously lights up blue.

3. Enter Access Conﬁguration Mode: Brieﬂy press the blue key button, which then

lights up blue.

4. Enter Add Mode: Press the OK/MENU button until you hear the second beep

(button lights up blue).

5. Hold up new admin card to be set up: Hold the new admin card up to the keypad

buttons until a beep sounds and the keypad shows a ﬂashing ring pattern. Make

sure that the card does not touch and inadvertently trigger any of the buttons.

hold (2nd beep)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 99 100

Sin comentarios

Mobotix T24S Información técnica Pagina 64