Mobotix M22M Información técnica descargar pdf (Pagina 22)

2.4 Power Supply of the MOBOTIX M22M

In order to reduce the amount of cabling, you should always use the Ethernet cable

(Power over Ethernet) to supply power to the camera.

For smaller installations, the MOBOTIX Network Power Adapter

MX-NPA-3-RJ

and

the external power unit

MX-SNT-E01-30-RJ

may suffice; larger installations would

benefit from one or more MOBOTIX Network Power Racks that are available for

supplying power to 4, 8 or 20 cameras (

MX-NPR-4

). Open

shop.mobotix.com in the Accessories section to find more information on

these and other items.

Since the MOBOTIX M22M supports Power over Ethernet (IEEE 802.3af), you can

also use PoE switches for supplying power.

Section 3.3,

Connecting the Camera

, contains more information on the possible

combinations of connections and power supply options.

www.mobotix.com • [email protected] • 31.1.2007

20/56

M22M Camera Manual Part 1

The M22M supports the

Power-over-Ethernet

standard IEEE 802.3af

Note

If you are using Power over Ethernet components (IEEE 802.3af) for

supplying power to the MOBOTIX M22M, these components have to

provide PoE class 0 (12.95Watts max. power consumption of attached

device). Although the M22M only uses 3Watts and does not require

heating even at very low temperatures, this will ensure that devices

attached to the USB port of the camera will be properly supplied.

Network Power Adapter

MX-NPA-3-RJ

Network Power Box

MX-NPR-4

Network Power Rack

MX-NPR-20

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Sin comentarios

Mobotix M22M Información técnica Pagina 22