Mobotix M22M Información técnica descargar pdf (Pagina 41)

Make sure that no other network device uses the camera's IP address:

• Open a command shell (Windows) or a console (Linux) and enter the follow-

ing command:

ping <factory IP address>

If you receive an answer from another network device although the camera is not

connected, you will have to remove that device until you have reset the MOBOTIX

camera to a free IP address. We recommend using the Quick Installation wizard for

this task.

If your computer does not use an IP address in the

10.0.0.0 network (e.g. a 192.168.x.x or 172.x.x.x

network), you should add a second IP address to the

network configuration of your computer or set a new

IP address:

Windows 2000/XP:

(1) Open the Network Connections and open the

Properties of LAN Connection.

(2) Double-click Internet Protocol (TCP/IP).

(3) Click on the Alternative Configuration tab.

(4) Enter an IP address (e.g. 10.1.0.11) in the class A

network (10.x.x.x) that is unique in your network

and that is not the same as the camera's IP

address.

(5) Close all dialogs by clicking on OK.

Linux/UNIX:

(1) Open a console as root user and enter the follow-

ing command:

ifconfig eth0:1 10.1.0.11

The computer now has the additional IP address 10.1.0.11, allowing it to access

the camera with its factory IP address in the 10.x.x.x network (10.1.0.99 in

this example).

39/56

M22M Camera Manual Part 1

The factory IP address is

printed on the sticker on

the camera housing

Example: 10.1.0.99

www.mobotix.com • [email protected] • 31.1.2007

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Sin comentarios

Mobotix M22M Información técnica Pagina 41