Mobotix S15 Especificaciones descargar pdf (Pagina 110)

110/164

S15 Camera Manual: Operating the Camera

www.mobotix.com • [email protected]

3.2 First Images and the Most Important Settings

Once the MOBOTIX camera has been connected to the network, you need to set up the

cameras network interface accordingly. This step involves setting up and checking the

network parameters of the camera. If your network is already using an IP address in the

10.x.x.x range with a 255.0.0.0 network mask, you do not need to change the

cameras network parameters. You can access the camera directly (see

Section 3.2.2

). If

your network or computer does not use an IP address in the 10.x.x.x range (for example,

in the 192 or 172 ranges), you should follow one of the following methods for changing

the cameras network parameters:

• Manual setup in the browser (

Section 3.2.1

)

•

Automatic setup using MxControlCenter or MxEasy (

Section 3.2.3

and

Section 3.2.4

)

Note

We will use a camera with the factory address 10.8.0.99 in the following exam-

ples. Replace this IP address with the IP address of your camera. You will ﬁnd the

IP address of your camera on a small sticker on the camera. Make sure that the

IP addresses used in the following examples are not already being used by other

devices in the network.

3.2.1 Manually Setting Up the Network Parameters in a Browser

You need a computer that is using a 10.x.x.x IP address in order to manually set up the

network parameters of the MOBOTIX camera. The computers network parameters usually

have to be changed for this purpose.

1. Change the Network Parameters of Your Computer:

Windows (XP, Vista and 7):

1. Open

Start > Settings > Control Panel > Network

Connections

. Clicking on Properties opens the dialog

box shown.

2. Double-click on Internet Protocol (TCP/IP). On the

General tab, activate the

Use the following IP address

option. Enter an IP address in the 10.x.x.x range in

this ﬁeld (for example, 10.8.0.11).

Once all dialog boxes have been closed, the computer

will have the IP address 10.8 .0.11.

Pressing the “L” key will

prompt the camera to

announce its current IP

address on the camera

speaker (see the gure

Section 2.5.8, «Camera

Startup Sequence»

)

Entry in “Subnet mask”

eld: 255.0.0.0

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 163 164

Comentarios a estos manuales

Sin comentarios

Mobotix S15 Especificaciones Pagina 110

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Mobotix S15