Mobotix S15 Especificaciones Pagina 82

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 164
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 81
82/164
S15 Camera Manual: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Mounting the Thermal Sensor Modules
Front Plate Mounting
Tighten the cylinder head screws (red arrows) to push the pressure plate against the wall/
faceplate. Hole diameter Ø48mm, possible thickness of wall/faceplate: 0 to 14mm/0to
0.6in.
Screw Mounting
The housing can be installed by axing suitable screws M4 (4mm length of thread) in at
least two of the six tap holes. Remove pressure plate and cylinder head screws.
For additional information on the MOBOTIX thermal sensor modules and the Quick
Installation, see www.mobotix.com>Products> Cameras> S15 FlexMount.
Front plate
Pressure plate
Hole diameter Ø48mm
Two tap holes on right-hand
side of housing
Two tap holes at bottom of
housing
Two tap holes on left-hand
side of housing
Remove!
Additional Information,
Quick Installation:
www.mobotix.com >
Products > Cameras >
S15 FlexMount
Vista de pagina 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 163 164

Comentarios a estos manuales

Sin comentarios