
20/118
T24 System Manual Part 2: Overview Of Application Scenarios
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
1.3.3 Network Without DHCP Server (Static IP Addresses)
If you are using a network with a static IP address and no DHCP server, you must manu-
ally set up all devices connected to the network. You must also configure these devices
so that they are assigned to static IP addresses within the same range of addresses. This
will enable the devices to communicate with one another.
You will need a PC with MxEasy and a LAN connection in order to carry out the setup. We
describe the basic process of configuring one or more T24 Video Door Station devices
in networks with static IP addresses in Section 4.3. With this configuration, you can only
startup the system using a computer with MxEasy. It is not possible to operate the system
by pressing the bell button on the camera module.
Outdoors Indoors
Master door station (*201)
10.8.0.30
PoE switch
PC
10.8.0.20
Videophone (*102)
10.8.0.11
Videophone (*101)
10.8.0.10
Comentarios a estos manuales