Mobotix T24 Información técnica descargar pdf (Pagina 78)

78/118

T24 System Manual Part 2: Access Conﬁguration On The Keypad

www.mobotix.com • [email protected]

3.7 Change Super PIN Using The Keypad

We recommend changing the Super PIN for security reasons (protection against manipulation

or unauthorized access to the door station)

• if you suspect that unauthorized persons may know your current Super PIN, or

• if you have taken over an existing door station that is still set up with the previous

owner’s Super PIN.

The other method for changing the Super PIN (by video phone) is described in Section 2.3.3.

To change the Super PIN, you need the old (i.e. the current) Super PIN, a new secure Super

PIN (8–16 digits) and the red admin card.

Proceed As Follows:

1. Select a new Super PIN and immediately make a note of it on your T24 User Data

Record Card (see 3.2.2). The new Super PIN also needs to have at least eight and

no more than 16 digits, and it should be selected with security in mind (no obvious

number combinations).

2. Enter Conﬁguration Mode: Press the OK/MENU button until you hear the second

beep (button ﬂashes blue).

3. Hold your admin card up to the keypad buttons until you hear a beep and the

OK/MENU button lights up blue continuously.

4. Enter Access Conﬁguration Mode: Brieﬂy press the blue key button, which then

lights up blue.

hold (2nd beep)

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 119 120

Sin comentarios

Mobotix T24 Información técnica Pagina 78