Mobotix T24 Información técnica descargar pdf (Pagina 67)

67/118

Managing Transponders

www.mobotix.com • [email protected]

Erase non-present admin card: Enter the transponder number of the card to be

erased and press the ESC/ALARM button until you hear the second beep (ESC/

ALARM button ﬂashes red). Re-enter the transponder number for conﬁrmation and

press the ESC/ALARM button until you hear the second beep.

7. The admin card details have now been erased from the system and, if required,

the card can be set up afresh. You are now back in conﬁguration mode (the OK/

MENU button lights up blue). Press the ESC/ALARM button to exit. After 60 seconds,

the mode is exited automatically.

Note

In case of a wrong entry, cancellation of entry via the ESC/ALARM button, or a delay

of more than 60 seconds, a low warning tone is sounded and the system reverts to

the regular operating mode (all buttons light up white). If required, re-enter into Erase

mode as described above.

0 9

Transponder No.

ESC

hold (2nd beep)

0 9

Transponder No.

ESC

hold (2nd beep)

ESC

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 119 120

Sin comentarios

Mobotix T24 Información técnica Pagina 67