Mobotix T24 Información técnica descargar pdf (Pagina 22)

22/118

T24 System Manual Part 2: System Startup Without A PC

www.mobotix.com • [email protected]

2 SYSTEM STARTUP WITHOUT A PC

We recommend reading Chapter 2 carefully before starting with the initial system startup

in Section 2.1 to avoid operating errors. Please ﬁrst read this selection of frequently asked

questions:

How Do I Initiate The System Startup Process Without A PC?

With the exception of the special case described in Section 1.3.3, in which static IP addresses

are used, initial system startup always starts with the auto-conﬁguration process, which is

activated by pressing the bell button on the camera module. This procedure is described

in Section 2.1 and ends with a short functional test.

What Do I Need To Do After Auto-Conﬁguration?

If your door station has a keypad, all you need to do now is enter an 8- to 16-digit Super

PIN of your choice and set up the supplied red transponder card (admin card), as

shown in Section 2.2. You can also easily set up the blue user cards; however, it is not

absolutely necessary to do this now.

As the owner of a door station with a keypad, you are free to choose how many of the

supplied user cards you would like to set up. You can use a validated card to open the

door without a key (passive RFID technology– transponders do not require a battery) and

listen to messages recorded in your voice mailbox on the outdoor station.

If you choose, you can also use individually-selected Personal, Transponder and Contact

Numbers to set up your cards. For further details and information on how to manage

all your access media (cards and PINs), please refer to Chapter 3 of this manual (Access

Conﬁguration On The Keypad).

Start

auto-conﬁguration

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 119 120

Sin comentarios

Mobotix T24 Información técnica Pagina 22