
2.3 Optional Accessories
Power supply (MX-SNT-E/U/GB/J/AUS01-30-RJ)
The MOBOTIX power supply is required if you do not
use a Network Power Box or Network Power Rack
(see below), or a PoE-compatible switch or router.
Network Power Adapter (MX-NPA-3-RJ)
The Network Power Adapter allows injecting the power supply for the MOBOTIX
camera into the network cable. It thus allows using a single cable for connecting to
the camera and for remotely supplying power (up to
100m/300ft). The Network Power Adapter is requi-
red, if you are using the universal power supply and
the SecureFlex mount, and power is not supplied
using a PoE switch/router or a MOBOTIX Network
Power Box/Rack.
Network Power Box for up to 4 Cameras (MX-NPR-4)
The MX-NPR-4 allows supplying power to up to four
MOBOTIX cameras via the network cable. The
NPR-4 thus replaces four separate power supplies
and four Network Power Adapters. The Network
Power Box delivery includes a (detachable) clip at
the back, which simply clicks onto DIN rails.
Network Power Rack for 8/20 Cameras (MX-NPR-8/20)
The MX-NPR-8/MX-NPR-20 allow supplying power
to up to 8/20 MOBOTIX cameras, respectively, via
the network cable. These NPRs thus replace 8/20
separate power supplies and the same number of
Network Power Adapters; they are easily mounted
in 19" racks (2 rack units).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
30/96
D12 Camera Manual Part 1
Not required if network
components are used that
support the PoE (Power
over Ethernet) standard
IEEE 802.3af!
Power supply for smaller
systems
Intelligent and robust po-
wer supply thanks to DIN
rail installation
Zero maintenance and
reliable as these devices
do not require fans
Advantages of the MOBOTIX PoE Products
• Zero maintenance and reliable as the systems do not require
fans.
• Higher reliability of the system as a whole, since standard swit-
ches without PoE can be used (lower risk of failure).
• Easy installation on DIN rails (
MX-NPR-4
) or in 19" racks
(
MX-NPR-8/20
).
Comentarios a estos manuales