Mobotix D12 Información técnica descargar pdf (Pagina 51)

Use the supplied drilling template (at the back of this manual) to mark the

position for drilling the dowel holes and the holes through which the cables will be

led later on. When printing or copying the drilling template, make sure that it is not

scaled down!

• Use the supplied 10mm dowels (item15),

8x70mm screws (item17) and dia. 8.4mm

washers (item16) for mounting the outdoor

wall mount to the wall!

• Before installing the wall mount, attach the

supplied wall sealing (item18) to the back

(wall) side using some silicone sealant. If the

outdoor wall mount is mounted to a very

rough surface, the top of the wall mount

should be sealed to the wall using good-

quality silicone sealant.

• The rectangular opening at the wall mount's

rear side has been designed to cover the

wall outlet.

• If you

do not

use the pre-installed Ethernet

cable, make sure that the installed cable

has a minimum length of 70cm from the

wall or wall outlet.

www.mobotix.com • [email protected] • 23.11.2006

49/96

D12 Camera Manual Part 1

Find the folded drilling

template at the end of

the manual!

Make sure that the drill-

ing template is not scaled

down when printing!

Apply silicone sealant!

Cable length from wall:

approx. 70 cm

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 99 100

Sin comentarios

Mobotix D12 Información técnica Pagina 51