Mobotix D12 Información técnica descargar pdf (Pagina 52)

2.8.3 Determining the Position of the Camera on the Bottom Plate

Once the outdoor wall mount has been mounted to the wall, the camera can be

fixed to the underside of the bottom plate (item14). The bottom plate closes off

the outdoor wall mount from below and also holds the camera.

The upper side of the bottom plate has 24 holes for the M4 stainless steel hex

nuts (item20); it is thus possible to mount the camera in increments of 15 degrees.

In order to facilitate the alignment process, all holes have numbers from 1 to 8.

Three standard positions are identified as described below:

• PIR sensor of the camera looks straight ahead: Use

the holes marked with the number 1 for the 20mm

hex nuts (item20).

• PIR sensor of the camera looks to the right: Use the

holes marked with the number 3 for the 20mm

hex nuts (item20).

• PIR sensor of the camera looks to the left: Use the

holes marked with the number 7 for the 20mm

hex nuts (item20).

www.mobotix.com • [email protected] • 23.11.2006

50/96

D12 Camera Manual Part 1

The bottom plate closes

off the outdoor wall

mount from below and also

holds the camera

PIR looking straight

ahead: 1

PIR looking to the right: 3

PIR looking to the left: 7

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 99 100

Sin comentarios

Mobotix D12 Información técnica Pagina 52