3 OPERATING THE CAMERA
3.1 General Procedure
The MOBOTIX camera does not require any software installation; all you need is
your preferred browser with JavaScript support to operate the camera. Thus, the
MOBOTIX camera is supported by all common operating systems (such as
Windows, Macintosh and Linux, ...).
3.1.1 Establishing the Power Supply of the Camera
You can choose between the following options:
• External power supply and Network Power Adapter (MX-NPA-3-RJ): Po-
wer supply of one camera injected into the network cabling (max. length
100m/110yd.), from the NPA to the 10BaseT/NET connector of the camera
(see section 2.10,
Optional Accessories
).
• Network Power Box/Rack (MX-NPR-4, or 8/20): Power supply of 4/8/20
cameras injected into the network cabling (max. length 100m/110yd.), from
the NPR to the 10BaseT/NET connector of the camera (see section 2.10,
Optional Accessories
).
• Power over Ethernet: Power supply using network components that are
conforming to the PoE standard IEEE 802.3af.
3.1.2 Connecting the Camera
The camera has been set at the factory to support the following connection
methods:
• Ethernet interface of the camera (10/
100 Mbps Ethernet): Connect directly from
a computer (using a crossover cable) or
by using a Network Power Adapter or a
switch and a regular patch cable. Launch
a browser and enter the IP address prin-
ted on the camera label (e.g.
10.1.0.99).
If your network does not support a Class
A network (i.e. 10.x.x.x), your PC or
laptop will have to be set temporarily to
such a network address. For operating
systems that allow multi-homing (Windows 2000, Windows XP, Linux, Mac
OS X), you can set a second IP address in the 10.x.x.x network.
• ISDN interface of the camera: From a computer with ISDN card using a RAS
connection (linux/tux). Launch a browser and enter the IP address printed on
the camera label (e.g. 10.1.0.99).
Once a connection has been established, click on the Admin Menu button to start
configuring the camera. The Admin Menu controls all network settings (IP address,
netmask, DHCP, etc.), ISDN behavior and other options.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
64/96
D12 Camera Manual Part 1
MOBOTIX PoE products
do not have any fans and
are robust and reliable!
PoE components (IEEE
802.af) should not have
fans as this will increase
the overall reliability of
the entire system
Computer settings:
• IP address: 10.1.0.11
• Netmask: 255.0.0.0
• Gateway: none
• DNS: none
In the RAS box (compu-
ter):
• camera phone number
• User: linux
• Password: tux
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales