
101/140
First Images and the Most Important Settings
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Linux/Unix:
1. Open a terminal as root user.
2. Enter the following command: ifcong eth0:1 10.8.0.11
3. The computer is now also using the IP address 10.8.0.11
Mac OSX:
1. Open
System Properties> Network.
2. Select Ethernet. In the Configuration field, select
Manual
and enter a 10.x.x.x IP address (e.g.
10.8.0.11 ).
3.
Click Apply on the bottom right-hand side of the dialog
to assign the computer the IP address 10.8.0.11.
2. Set Up the Target Network Parameters of the Camera:
1. Open a web browser on the computer and enter the default IP address of the
MOBOTIX camera in the address bar of the browser (e.g. 10.8.0.99). Pressing
Enter displays the user interface of the MOBOTIX camera (see also
Section 3.2.2,
«First Images and the Most Important Settings in the Browser»
).
2. Click the Admin Menu softbutton in the user interface of the MOBOTIX camera.
The Quick Installation starts automatically once the
admins
user has logged on.
Note: The Quick Installation can also be executed at a later stage by opening
Admin
Menu> Network Setup> Quick Installation
(see also
Section 5.2, «Quick Installation»
in the
Camera Software Manual Part 2
).
3. Enter the target network parameters of the camera
on the appropriate page of the Quick Installation
assistant.
Note: The network parameters can also be accessed
at a later stage by opening
Admin Menu> Network
Setup> Quick Installation
.
4. Once you have completed the Quick Installation and rebooted the camera, the
new network parameters will be activated. The camera can now be connected
to the target network and, if required, further configured.
Default access
credentials
User Name: admin
Password: meinsm
Comentarios a estos manuales