Mobotix MX-D25M-SEC-D76 Especificaciones descargar pdf (Pagina 114)

114/140

D25M Camera Manual: Operating the Camera

www.mobotix.com • [email protected]

3.3 Adjusting Lens Focus and Correcting Lens Distortion

3.3.1 Aiming and Adjusting the Lens

Make sure that you see the live image of the camera on the monitor of your computer or

laptop. Now adjust the lens mount until you see the desired image area on your monitor:

• Remove the camera dome. Use the supplied plastic foil

or a cotton cloth to remove the dome by turning it in a

counter-clockwise direction. With IT/Secure models, you

may have to remove the outer shell ﬁrst.

• Loosen the toothed ring slightly by turning it in a counter-

clockwise direction using the supplied hook wrench. In

addition, loosen the two Allen screws on both sides of the

lens mount slightly by turning them in a counter-clockwise

direction using the supplied Allen wrench.

Loosen the ring and screws until you are still able to pan

and rotate the internal part of the camera with the lens

without much force but not so far that the lens is unable

to move on its own.

• Now aim the camera by rotating and panning the lens

mount (Note: the MicroSD card slot must point downward

for the camera’s live image to be displayed properly). Never

use force when adjusting the direction of the camera, as

this could damage the camera beyond repair.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 139 140

Sin comentarios

Mobotix MX-D25M-SEC-D76 Especificaciones Pagina 114