Mobotix MX-D25M-SEC-D76 Especificaciones descargar pdf (Pagina 96)

96/140

D25M Camera Manual: Operating the Camera

www.mobotix.com • [email protected]

3 OPERATING THE CAMERA

3.1 Manual and Automatic Operation - Overview

MOBOTIX cameras do not require any extra software. Thus, you can set up and operate the

MOBOTIX camera using a JavaScript-enabled browser on all common operating systems

(such as Window, Linux, Macintosh, etc.). As an alternative, you can also use the MOBOTIX

applications MxControlCenter and MxEasy. Follow these steps to set up the camera:

1. Connect the camera to the network. Power is supplied directly via the network

cable (see

Section 2.1.3

)

2. Set up the camera's network parameters:

– Manually using a web browser (see

Section 3.2.1

, then

Section 3.2.2

)

– Automatically using MxControlCenter/MxEasy (see

Section 3.2.3

and 3.2.4) or

via DHCP (see

Section 3.2.6

)

3. Conﬁgure the camera using the browser-based user interface.

Every MOBOTIX camera comes preconﬁgured with a ﬁxed IP address in the 10.x.x.x range

(e.g. 10.8.0.99). However, local computer networks usually have IP addresses in the

172 or 192 ranges. In order to access a MOBOTIX camera via the network, the camera

needs to obtain an IP address in the same address range. You can set up the network

parameters of the MOBOTIX camera using one of the following methods: Manually,

using MxCC and MxEasy or by DHCP.

Camera software

in the browser

Download the MxEasy

and MxControlCenter

software for free at

www.mobotix.com

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 139 140

Sin comentarios

Mobotix MX-D25M-SEC-D76 Especificaciones Pagina 96