Mobotix MX-D25M-SEC-D76 Especificaciones descargar pdf (Pagina 42)

42/140

D25M Camera Manual: Product Overview

www.mobotix.com • [email protected]

and thereby the highest possible accuracy of the received GPS data. The maximum length

of the MxBus wiring (0.8mm diameter wires) is 50m/55yd.

1.4.16 MX-232-IO-Box

Order no.: MX-OPT-RS1-EXT

This box provides the signal inputs and outputs as well as

the RS232 (serial) interface. It replaces the connections that

were handled on the older camera models via a D-Sub

15-HD connector. The MX-232-IO-Box (protection class

IP65, –30 to +60°C/–22 to +140°F) can be attached to all

MOBOTIX cameras with an MxBus or USB interface. The

maximum length of the MxBus wiring (0.8mm diameter

wires) is 50m/55yd. If the MiniUSB connector is used,

the maximum cable length is 5m/16ft.

1.4.17 ExtIO Expansion Module

Order no.: MX-ExtIO

The device, which is suitable both for on-wall and in-wall

installations, contains a powerful speaker, microphone,

infrared motion sensor, ambient temperature sensor, two

input and two output contacts and two illuminated keys. It

is ideal for door communication, elevators, access control

systems, etc. The ExtIO is suitable for use as direct con-

nection to the S15 via a MiniUSB cable (max. 5m), which

can be ordered separately, or as a network connection

via the PoE switch.

1.4.18 Mx2wire+ Media Converter

Order no.: MX-2wirePlus-Set-PW

The Mx2wire+ system allows an Ethernet network with

PoE to be set up via two-wire cables, which saves users

from having to lay several hundred meters of Ethernet

cable. For example, an existing two-wire cable of an

analog video camera can be reused to connect a high-

resolution and modern IP network camera. Mx2wire+

is delivered in the standard wall outlet frame in dierent

designs; however, it can also be used with the available

on-wall socket that is included.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 139 140

Sin comentarios

Mobotix MX-D25M-SEC-D76 Especificaciones Pagina 42