Mobotix MX-D25M-SEC-D76 Especificaciones descargar pdf (Pagina 86)

86/140

D25M Camera Manual: Installation

www.mobotix.com • [email protected]

2.8 Replacing the MicroSD Card

The camera must be taken down to remove, insert or

replace a MicroSD card. To avoid data loss, be sure

to deactivate MicroSD card recording in the camera

software and reboot the MOBOTIX camera before

removing the card.

Caution

A MicroSD card may only be removed from the camera after you have deactivated

recording to a Flash device and rebooted the camera. Failing to do so may lead to

data loss! Before inserting the MicroSD card, make sure that it is not write-protected!

2.8.1 Removing a MicroSD Card

•

Deactivate recording: Recording to MicroSD card must be deactivated (Admin Menu>

Storage on External File Server/ Flash Device). If MicroSD card recording is still

active, deactivate recording and reboot the camera.

Section 3.5, «MicroSD Card

Recording»

, contains more information on this topic.

•

Remove the outer shell: Remove all four Allen screws using

the supplied Allen wrench. Take o the outer shell.

• Remove the camera dome. Take the delivered plastic foil

or a cotton cloth and remove the dome by turning it in

counter-clockwise direction.

• Remove the MicroSD card: Gently push the MicroSD card

into the card slot of the camera. The card is released from

the slot and can be removed from the camera.

Push-push operation: only

remove the MicroSD

card after rst gently

pushing it in

Click!

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 139 140

Sin comentarios

Mobotix MX-D25M-SEC-D76 Especificaciones Pagina 86