Mobotix MX-KEYPAD1-EXT-SV Información técnica descargar pdf (Pagina 100)

100/148

T24 System Manual Part 1: Installation

www.mobotix.com • [email protected]

2.5.3 Mounting Instructions

Solid Concrete Or Stone Wall

MOBOTIX recommends using a deep in-wall socket (more space for cables). Standard

in-wall sockets with a depth of 43 mm are not suitable for the T24-DoorMaster.

Cavity Wall (e.g. Plasterboard, 7 mm to 35 mm)

Use the supplied 61 mm-deep cavity socket for the T24-DoorMaster.

Note

MOBOTIX oers two orange cavity sockets of dierent depths (48 mm and 61 mm).

The 61 mm-deep socket is designed for the T24-DoorMaster, and the 48 mm-deep

socket is intended for the T24-Info2wire+ indoor unit.

Determining The Installation Position

The T24-DoorMaster must always be installed indoors protected from weather and moisture.

If in doubt, use the normal installation conditions of a standard socket with no cover as a

guide. The anti-theft protection connection cables pre-ﬁtted to the frame of the outdoor

station do not need to be extended if the T24-DoorMaster is mounted on the same wall

behind the outdoor station (next to the entrance door).

C#&<< 5"<$ ("# 1*7&+4

2"16$+, g JF ))

Cavity socket (ø 68 mm, 61 mm in depth)

!*0&)3) !0N32

1*/<$ <$'@+5 /$+-$$'

89:?C""#!*2+$# *';

;""# 2+*+&"', cG )

Deep in-wall socket (ø 68 mm, 67 mm in depth)

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 149 150

Sin comentarios

Mobotix MX-KEYPAD1-EXT-SV Información técnica Pagina 100