Mobotix MX-KEYPAD1-EXT-SV Información técnica descargar pdf (Pagina 85)

85/148

Installing The T24 Modules

www.mobotix.com • [email protected]

4. Connect the two MxBus cables that come from the camera module to the

keypad board.

• Red wire to MX + terminal

• Blue wire to MX - terminal

5. Connect two new MxBus cables to the keypad

board, and subsequently connect these to the

info module to power its backlighting. Make sure

that the cables are of the required length and that

they are routed correctly (does not apply to

T24-Info2wire+ info module).

• Red wire to MX + terminal

• Blue wire to MX - terminal

Note

If the info module is connected to the MxBus connector of the door camera T24-

CamCore, the two MxBus cables of the T24-DoorMaster can be connected to the

keypad instead.

If no lighting function is required for the info module at all, the MxBus cables do not

need to be connected to this module.

D$$ +5$ 1 #13&+ "7$#7 $-

;&*@#*) "' +5$ '$0+ >*@$

C" !"# 2-*> +5$

>"<*#&+4 "( +5$ U

*'; ? !0N32 -&#$2

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 149 150

Sin comentarios

Mobotix MX-KEYPAD1-EXT-SV Información técnica Pagina 85