Mobotix MX-KEYPAD1-EXT-SV Información técnica descargar pdf (Pagina 137)

137/148

Installation In The Siedle Vario System

www.mobotix.com • [email protected]

Door Contact And Door Lock Switch

Connect both with one connection each to c; connect the second connector of the door

contact to IO module Dpc (Door Position Contact); connect the second connector of the

door lock switch to IO module Bpc (Bolt Position Contact).

Note

The contacts can generally also be installed in existing doors. To do so, use a long

drill bit to drill a conduit in the door frame leading directly to an in-wall socket on the

wall facing the door inside the building, then lay a cable from here to the door station.

Siedle Anti-Theft Protection

The separately available Siedle Anti-Theft Protection module

(DSC 602-0 with ZDS 601-0) provides additional protection by

electromagnetically locking the installation frame so that the

individual modules can no longer be mechanically removed

(using the supplied Siedle key) from the door station.

The lock (ZDS 601-0) mounted in the installation frame is

connected to the associated controller (DSC 602-0) in the

electrical cabinet. Anti-theft protection can only be activated

or deactivated using this controller.

Installation instructions are included in the Siedle Anti-Theft

Protection package.

Board Module

Dpc Door contact

Board Module

Bpc

Door lock

switch

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 149 150

Sin comentarios

Mobotix MX-KEYPAD1-EXT-SV Información técnica Pagina 137