Mobotix MX-KEYPAD1-EXT-SV Información técnica descargar pdf (Pagina 66)

66/148

T24 System Manual Part 1: Installation

www.mobotix.com • [email protected]

2.3 Mounting The Frame And Housing

A complete T24 door station system includes components that are mounted next to the

entrance door, which means they are usually installed outdoors, as well as components

such as the T24-DoorMaster, remote stations and power supplies that are installed inside

a building.

Please note that only the T24 camera, keypad and info module are suitable for outdoor

installation (IP65, -30°C to +50°C/-22°F to +122°F). The modules will only be weatherproof

if they have been installed correctly using matching MOBOTIX housings and frames.

2.3.1 Determining The Installation Position

Before installing the door station, you need to decide exactly where to install it. In addition

to being mounted vertically (most popular installation option), the door station can also

be mounted horizontally.

In a vertical layout, the camera module T24-CamCore is normally positioned right at the

top. The keypad is located directly underneath, followed by the info module.

Note

Position the housing directly above the cables that come out of the wall (network,

two-wire cables). None of the connection cables should remain visible, as this would

make them vulnerable to manipulation.

B '+,

8" 1*>+3#$ @"";?V3*<&+4

&)*@$2 *+ '&@5+ *2 -$<<A

]+ *' "3+;""# <&@5+

*>>#"0&)*+$<4 E ) */"7$

+5$ ;""# 2+*+&"' P-&+5

&'+$@#*+$; )"+&"' 2$'2"#Q

Horizontal installationVertical installation

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 149 150

Sin comentarios

Mobotix MX-KEYPAD1-EXT-SV Información técnica Pagina 66